Configure Snmpv3 Delete Notify - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

Commands for Managing the Switch

configure snmpv3 delete notify

configure snmpv3 delete notify [{{hex <hex value>} <notify name>} |

all-non-defaults]

Delete an entry from the snmpNotifyTable.

Syntax Description

all-non-defaults

Usage Guidelines

Use this command to delete an entry from the snmpNotifyTable. When a notification is to be sent, this

table is examined. For the target addresses that have been associated with the tags present in the table,

notifications will be sent, based on the filters also associated with the target addresses.

There is one default notification that cannot be deleted, defaultNotify.

Use the following command to remove the N1 entry from the table:

configure snmpv3 delete notify N1

This command was first available in ExtremeWare 7.1.0.

This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.

Platform Availability

This command is available on all platforms.

Specifies that the value to follow is to be supplied as a colon separated string

of hex octets.

Specifies the notify name to add.

Specifies that all non-default (non-permanent) notifications are to be deleted.

ExtremeWare 7.5 Command Reference Guide

Extremeware 7.5