Configure Snmpv3 Add Target-Addr - Extreme Networks ExtremeWare Command Reference Manual

Commands for Managing the Switch

configure snmpv3 add target-addr

configure snmpv3 add target-addr [{hex <hex value>} | <addr name>] param
[{hex <hex value>} | <param name>] ipaddress <ip address> {/<target-addr
mask>} {transport-port <port>} {from <source IP address>} {tag-list {hex
<hex value>} <tag>, {hex <hex value>} <tag>, ...} {volatile}
Description
Add and configure an SNMPv3 target address and associate filtering, security, and notifications with
that address.
Syntax Description
hex
addr name
param name
ip address
target-addr mask
port
source ip address
tag
volatile
Default
The default values are:
• transport-port—port 162
• tag-list—the single tag defaultNotify, a pre-defined value in the snmpNotifyTable
• non-volatile storage
Usage Guidelines
Use this command to create an entry in the SNMPv3 snmpTargetAddressTable. The
associates the target address with an entry in the snmpTargetParamsTable, which specifies security and
storage parameters for messages to the target address, and an entry in the snmpNotifyFilterProfileTable,
which specifies filters to use for notifications to the target address.
Example
The following command specifies a target address of 10.203.0.22, port 9990, with the name A1, and
associates it with the security parameters and filter profile P1, and the notification tags type1 and type2:
configure snmpv3 add target-addr A1 param P1 ipaddress 10.203.0.22 transport-port 9990
tag-list type1, type2
154
Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
Specifies a string identifier for the target address.
Specifies the parameter name associated with the target.
Specifies an SNMPv3 target IP address.
Specifies a hex octet string used to mask the target address. For example, f7a
indicates 1.1.1.1.0.1.1.1.1.0.1.0.
Specifies a UDP port. Default is 162.
Specifies the IP address of a VLAN to be used as the source address for the
trap
Specifies a string identifier for the notifications to be sent to the target.
Specifies volatile storage.
parameter
param
ExtremeWare 7.5 Command Reference Guide