Configure Snmp Syscontact - Extreme Networks ExtremeWare XOS Command Reference Manual

configure snmp sysContact

configure snmp sysContact
configure snmp syscontact <sysContact>
Description
Configures the name of the system contact.
Syntax Description
sysContact An alphanumeric string that specifies a system contact name.
Default
N/A.
Usage Guidelines
The system contact is a text field that enables you to enter the name of the person(s) responsible for
managing the switch. A maximum of 255 characters is allowed.
To view the name of the system contact listed on the switch, use the command. The
show switch show
command displays switch statistics including the name of the system contact.
switch
Example
The following command defines FredJ as the system contact:
configure snmp syscontact fredj
History
This command was first available in ExtremeWare XOS 10.1.
ExtremeWare XOS 11.0 Command Reference Guide 79