Show Pppoe Interface Lockout-Time - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

show pppoe interface lockout-time

show pppoe interface [ interfaceType interfaceSpecifier ] lockout-time [ filter ]
Syntax
Command introduced in JUNOSe Release 7.2.0.
Release Information
In configurations with dynamic PPPoE subinterfaces over static PPPoE major
Description
interfaces, displays detailed information about the current encapsulation type lockout
condition for each PPPoE client associated with the dynamic PPPoE subinterface
column.
Options
Privileged Exec, User Exec
Mode
interfaceType One of the following interface types listed in "Interface Types
and Specifiers" on page 5:
atm
fastEthernet
gigabitEthernet
lag
serial PPPoE is not currently supported on serial interfaces
tenGigabitEthernet
interfaceSpecifier Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
filter See Filtering show Commands on page 4
Chapter 7: S Commands
show pppoe interface lockout-time
1037