Display Rmon Statistics - 3Com S7906E Command Reference Manual

Related commands: rmon prialarm.
Examples
# Display the configuration of all private alarm entries.
<Sysname> display rmon prialarm
PrialarmEntry 1 owned by user1 is VALID.
Samples type
Variable formula
Description
Sampling interval
Rising threshold
Falling threshold
When startup enables
This entry will exist : forever
Latest value
Table 1-5 display rmon prialarm command output description
Field
PrialarmEntry
owned by
VALID
Samples type
Variable formula
Sampling interval
Rising threshold
Falling threshold
linked with event
When startup enables
This entry will exist
Latest value

display rmon statistics

Syntax
display rmon statistics [ interface-type interface-number ]
: absolute
: (.1.3.6.1.2.1.16.1.1.1.6.1*100/.1.3.6.1.2.1.16.1.1.1.5.1)
: ifUtilization.GigabitEthernet2/0/1
: 10(sec)
: 80(linked with event 1)
: 5(linked with event 2)
: risingOrFallingAlarm
: 85
The entry of the private alarm table
Owner of the entry, user1 in this example
Status of the entry identified by the index (VALID means the
entry is valid, and UNDERCREATION means invalid. You can
use the display rmon command to view the invalid entry; while
with the display current-configuration and display this
commands you cannot view the corresponding rmon
commands.)
Sampling type, whose value can be absolute or delta.
Variable formula
Sampling interval, in seconds. The system performs absolute
sample or delta sample to sampling variables according to the
sampling interval.
Alarm rising threshold. An event is triggered when the sampled
value is greater than or equal to this threshold.
Alarm falling threshold. An event is triggered when the sampled
value is less than or equal to this threshold.
Event index associated with the prialarm
How can an alarm be triggered
The lifetime of the entry, which can be forever or span the
specified period
The count result of the last sample
1-8
Description