3Com S7906E Command Reference Manual page 2146

View
Any view
Default Level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Description
Use the display rmon statistics command to display RMON statistics.
This command displays the interface statistics during the period from the time the statistics entry is
created to the time the command is executed. The statistics are cleared after the device reboots.
Related commands: rmon statistics.
Examples
# Display RMON statistics for interface GigabitEthernet 2/0/1.
<Sysname> display rmon statistics GigabitEthernet 2/0/1
EtherStatsEntry 1 owned by null is VALID.
Interface : GigabitEthernet2/0/1<ifIndex.3>
etherStatsOctets
etherStatsBroadcastPkts
etherStatsUndersizePkts
etherStatsFragments
etherStatsCRCAlignErrors : 0
etherStatsDropEvents (insufficient resources): 0
Packets received according to length:
64 : 0
256-511: 0
Table 1-6 display rmon statistics command output description
EtherStatsEntry
VALID
Interface
etherStatsOctets
: 43393306
: 503581
: 0
: 0
, 65-127 : 0
, 512-1023: 0
Field
, etherStatsPkts
, etherStatsMulticastPkts : 44013
, etherStatsOversizePkts
, etherStatsJabbers
, etherStatsCollisions
, 128-255 : 0
, 1024-1518: 0
Description
The entry of the statistics table, corresponding to the MIB
node etherStatsIndex.
Status of the entry identified by the index (VALID means
the entry is valid, and UNDERCREATION means invalid.
You can use the display rmon command to view the
invalid entry; while with the display
current-configuration and display this commands you
cannot view the corresponding rmon commands.),
corresponding to the MIB node etherStatsStatus.
Interface on which statistics are gathered, corresponding
to the MIB node etherStatsDataSource.
Number of octets received by the interface during the
statistical period, corresponding to the MIB node
etherStatsOctets.
1-9
: 619825
: 0
: 0
: 0