Display Snmp-Agent Statistics - 3Com S7906E Command Reference Manual

Subtree mask:
Storage-type: nonVolatile
View Type:excluded
View status:active
ViewDefault is the default view of the device. When you access the device through the ViewDefault view,
you can access all the MIB objects of the iso subtree except for the MIB objects under the
snmpUsmMIB, snmpVacmMIB, and snmpModules.18 subtrees.
Table 1-3 display snmp-agent mib-view command output description
Field
View name
MIB Subtree
Subtree mask
Storage-type
View Type
View status

display snmp-agent statistics

Syntax
display snmp-agent statistics
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display snmp-agent statistics command to display SNMP statistics.
Examples
# Display the statistics on the current SNMP.
<Sysname> display snmp-agent statistics
1684 Messages delivered to the SNMP entity
5 Messages which were for an unsupported version
0 Messages which used a SNMP community name not known
MIB view name
MIB subtree corresponding to the MIB view
MIB subtree mask
Storage type
View type, which can be included or excluded:
Included indicates that all nodes of the MIB tree are included
in current view, namely, you are allowed to access all the
MIB objects of the subtree
Excluded indicates that none of the nodes of the MIB tree
are included in current view, namely, you are allowed to
access none of the MIB objects of the subtree
The status of MIB view
1-5
Description