Load_Z_Table - Scanlab RTC6 PCIe Board Installation And Operation Manual

Ctrl Command load_z_table
Function Like load_z_table_20b.
However, for a focus length value l in RTC4 compatibility range [–32,768...+32,767].
Restriction Like load_z_table_no_20b.
ErrorNo = load_z_table( A, B, C )
Call
A
Parameters
B
C
Result Like load_z_table_no_20b.
Comments • Like load_z_table_no_20b. .
• load_z_table( A, B, C ) is synonymous with load_z_table_no( A, B, C, 0 ) .
RTC4RTC6 Unchanged functionality. In addition: changed value ranges and error codes.
If the correct calibration factors are used (see
the same ABC coefficients can be used on the same 3-axis scan system with the RTC4 and
RTC6 boards.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
References get_z_distance, read_abc_from_file, write_abc_to_file, load_z_table_no,
select_cor_table,
RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
Like load_z_table_no.
Like load_z_table_no.
Like load_z_table_no.
load_z_table_20b
Chapter "3D Commands", page 238), then
518