Scanlab RTC6 PCIe Board Installation And Operation Manual page 873

LASER Connector
Connector 15-pin D-SUB connector
(female)
Laser Control Signals LASER1, LASER2, LASERON
• TTL level 5 V, active-HIGH or
active-LOW
(programmable)
• Max. current load 20 mA
• Reference GND
"DC/DC
Analog outputs ANALOG
ANALOG OUT2
• Output voltage 0 V...10 V
range
• Resolution 12 Bit
• Max. current load 5 mA
• Reference GND
Digital input port 2 Bits
• LOW level < 0.6 V
• HIGH level > 2.3 V
• Max. input voltage –0.5 V...+5.5 V
range
• Input resistance > 4.7 k
(pull-up)
• Reference GND
Digital output 2 bits, buffered
• LOW level < 0.55 V
• HIGH level > 3.8 V
• Max. current load 20 mA
• Reference GND
(a) See footnote on page 73.
RTC6 boards
Doc. Rev. 1.0.21 en-US
15 Technical Specifications – RTC6 PCIe Board
(a)
(GND2 with Option
Converter")
OUT1,
(a)
(a)
(a)
Input ports for external TTL active-LOW, internally
start and stop signals connected to +3.3 V by
pull-up resistors (4.7 k)
• /START edge sensitive
HIGH level > 2.3 V
LOW level < 0.6 V
• /STOP level sensitive
HIGH level > 2.3 V
LOW level < 0.6 V
• Reference GND
Other signals
• BUSY OUT 5 V, TTL active-HIGH,
max. 10 mA
• +5 V max. 100 mA
• Reference GND
(a)
(a)
873