Scanlab RTC6 PCIe Board Installation And Operation Manual page 601

Ctrl Command save_disk
• save_disk always stores all characters, text strings and/or subroutines from the
Comments
(cont'd) referenced address to the next possible list_return.
to various
• save_disk automatically replaces unallowed commands (for example, set_end_of_list)
with
the last memory position of "List 3") are added.
• save_disk is not executed
– Mode = 0
– Name =
• save_disk is not executed
– the
– the
• save_disk is even executed, if:
– a list has been paused by
• During the runtime of save_disk:
– No further commands are executed
– External
• save_disk also stores version information which is checked by load_disk.
RTC4RTC6 New command.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
Last change DLL 615: version info.
References load_disk
RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
list_return commands) are thereby neither evaluated nor executed.
list_nop commands; missing commands (for example,
(get_last_error
NULL
(get_last_error
BUSY list execution status
INTERNAL-BUSY list execution status
set_wait (PAUSED list execution status
Starts are suppressed
Jump
return code RTC6_PARAM_ERROR), if:
return code RTC6_BUSY), if:
is set
is set
Commands (also branches
list_return upon reaching
set)
601