Set_List_Jump - Scanlab RTC6 PCIe Board Installation And Operation Manual

Undelayed

set_list_jump

Short List
Command
Function Produces an unconditional jump to the specified address within the
upon execution. The next command there is executed immediately without delay.
Call set_list_jump( Pos )
Parameters Pos
Comments • set_list_jump is synonymous with list_jump_pos. See the comments there.
RTC4RTC6 Unchanged functionality.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
References list_jump_pos
RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
Absolute jump address [0...(2
As an unsigned 32-bit value.
23
–1)].
RTC6 List Memory
680