Scanlab RTC6 PCIe Board Installation And Operation Manual page 557

Variable para_laser_on_pulses_list
List Command
RTC4RTC6 New command.
For the parameter P, see para_jump_abs.
RTC5RTC6 Unchanged functionality.
For the parameter P, see para_jump_abs.
Version info Available as of DLL 600, OUT 600, RBF 600.
References laser_on_pulses_list,
RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
laser_on_list
557