Checking For Overruns - Scanlab RTC6 PCIe Board Installation And Operation Manual

(4) Loading of correction files
For loading by load_correction_file, the integrity
of the to-be-loaded correction file is checked (by
the checksum) and the transfer itself checked for
correctness by an immediate read back of the
correction table. For this function, the
correction file must contain a checksum, see
command description of
verify_checksum.
(5) Loading of tables
For loading other tables (for example, by
load_varpolydelay), the transfer is checked for
correctness by an immediate read back of the
table. In addition to the
return code RTC6_VERIFY_ERROR, the
corresponding error return value of the loading
command is also get set.

6.8.2 Checking for Overruns

By get_overrun, it can be checked whether overruns
of the 10 µs clock cycle have occurred. See also
Section "Clock Overruns", page
RTC6 boards
Doc. Rev. 1.0.21 en-US
6 Developing RTC6-User Programs
set_verify and
get_last_error
182.
132