Scanlab RTC6 PCIe Board Installation And Operation Manual page 508

Ctrl Command load_position_control
• load_position_control is not executed
Comments
(cont'd)
– the
– the
• load_position_control is even executed, if:
– a list has been paused by
• During the runtime of load_position_control,
• Before loading a table, load_position_control performs a
produces error code 4 in case of error.
• The table can be saved by create_dat_file.
RTC4RTC6 New command.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
References set_auto_laser_control,
RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
BUSY list execution status
INTERNAL-BUSY list execution status
set_wait (PAUSED list execution status
create_dat_file
return code RTC6_BUSY), if:
(get_last_error
is set
is set
External Starts are suppressed.
set)
DSP memory check that
508