Scanlab RTC6 PCIe Board Installation And Operation Manual page 848

Normal List wait_for_timestamp_counter
Command
Function Waits for a
wait_for_timestamp_counter( TimeStampCounter )
Call
TimeStampCounter 32-bit offset to wait for.
Parameters
Comments • wait_for_timestamp_counter waits until the current
has reached the value
store_timestamp_counter_list) + TimeStampCounter.
• Delayed short list commands are executed first.
• This allows absolute time references from the point in time
established when loading a list. Accuracy: 10 µs.
• If the specified time has already passed when wait_for_timestamp_counter is
reached, a full
(duration: approx. 12 hours). This can be canceled by
• wait_for_timestamp_counter is synonymous with
wait_for_timestamp_counter_mode(
• Synchronization with other RTC6 commands, such as
commands, depends on external hardware.
• See
RTC4RTC6 New command.
RTC5RTC6 New command.
Version info Available as of DLL 617, OUT 617, RBF 623.
store_timestamp_counter, store_timestamp_counter_list,
References
wait_for_timestamp_counter_mode
RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
32-bit "Timestamp Counter"
As an unsigned 32-bit value.
TimeStampStorage
32-bit "Timestamp Counter"
Chapter 8.12 "Time Measurements", page
value.
32-bit "Timestamp Counter"
(from store_timestamp_counter
TimeStampStorage
cycle is waited for
stop_execution
Mode
> 2).
wait_for_encoder
281.
/
to be
or /STOP.
or conditional
848