Scanlab RTC6 PCIe Board Installation And Operation Manual page 854

Ctrl Command write_da_1
Function See write_da_x.
write_da_1( Value )
Call
Value
Parameters
RTC4RTC6 Unchanged functionality.
In RTC4 Compatibility
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
References write_da_x
Delayed Short write_da_1_list
List Command
See write_da_x_list.
Function
write_da_1_list( Value )
Call
Value
Parameters
RTC4RTC6 Unchanged functionality.
In RTC4 Compatibility
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
write_da_x_list
References
RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
12-bit output value for the
As an unsigned 32-bit value.
Higher bits are ignored.
Value = 0 corresponds to an output value of 0 V.
12
Value = 2
–1 corresponds to an output value of 10 V.
Mode: like write_da_x.
Like write_da_1.
Mode: like write_da_x.
ANALOG OUT1 analog output port.
854