Get_Rtc_Version - Scanlab RTC6 PCIe Board Installation And Operation Manual

Ctrl Command get_rtc_version
Function Returns the version number of the
enabled options of the RTC6 board.
RTCVersion = get_rtc_version()
Call
Result Version number of the
As an unsigned 32-bit value.
Bit #0 (LSB)
...
Bit #7
Bit #8
Bit #9
Bit #10
Bit #11
Bit #12
Bit #13
Bit #14
Bit #15
Bit #16
...
Bit #23
Bit #24
...
Bit #31
Comments • The
• get_rtc_version( Bit #0...Bit #7 ) returns values in the range 0...99
(version number – 600).
• The current
• The current
• The
RTC6_ACCESS_DENIED
RTC4RTC6 Unchanged functionality.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
References get_hex_version,
RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
FPGA firmware and additional information.
Version number of the
= 1: Option Processing-on-the-fly
See also
= 1: Option "Second Scan Head Control"
See also
= 1: Option "3D"
See also
= 1: Option "LDSA"
= 1: Option "SCANa"
= 1: Option "UFPM"
= 1: Option "syncA"
Reserved.
DSP version number.
Subversion number of the
FPGA firmware version numbers are in the range 600...699.
DSP version number is 3.
FPGA firmware subversion is 0.
FPGA firmware version can even be returned after an
error. The return value is 0, if no program has yet been loaded.
get_dll_version
FPGA firmware (RTC6RBF.rbf) and information about
FPGA firmware (RTC6RBF.rbf).
is enabled.
Chapter 8.6 "Processing-on-the-fly", page
Section "2. SCANHEAD Socket Connector", page
is enabled.
Chapter 8.5.2 "3D Scan Systems", page
is enabled (as of DLL 628).
is enabled (as of DLL 605).
is enabled (as of DLL 605).
is enabled (as of DLL 607).
FPGA firmware (RTC6RBF.rbf).
242.
is enabled.
68.
237.
RTC6_VERSION_MISMATCH
or
421