Scanlab RTC6 PCIe Board Installation And Operation Manual page 513

Ctrl Command load_stretch_table
• If Name is NULL, then load_stretch_table disables any enhanced 3D correction enabled
Comments
(cont'd) by a previous load_stretch_table.
• load_stretch_table is not executed
– the
– the
• load_stretch_table is even executed, if:
– a list has been paused by
• During execution of load_stretch_table,
• Before loading a table, load_stretch_table performs a
produces error code 4 in case of error.
RTC4RTC6 New command.
RTC5RTC6 Changed functionality.
• Additional TableNo parameter. This allows that each 3D correction table can be
assigned its own extended 3D correction.
Version info Available as of DLL 600, OUT 600, RBF 600.
References select_cor_table
RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
BUSY list execution status
INTERNAL-BUSY list execution status
set_wait (PAUSED list execution status
(get_last_error return code RTC6_BUSY), if:
is set
is set
External Starts are suppressed.
DSP
set)
memory check that
513