Get_Timestamp_Long - Scanlab RTC6 PCIe Board Installation And Operation Manual

Ctrl Command get_timestamp_long
Function Returns the current value of the
get_timestamp_long( &TimeStampL, &TimeStampH )
Call
TimeStampL
Returned
parameter
values
TimeStampH
Comments • The RTC6 board-internal
– Initialized with 0 at
load_program_file
– Used with
• The lower part of TimeStampCounterLong (= returned parameter value TimeStampL) and
the
• See
RTC4RTC6 New command.
RTC5RTC6 New command.
Version info Available as of DLL 624, OUT 624.
wait_for_timestamp_counter_long
References
RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
64-bit "Timestamp
Lower 64-bit "Timestamp Counter"
As an unsigned 32-bit value.
Upper 64-bit "Timestamp Counter"
As an unsigned 32-bit value.
64-bit "Timestamp Counter"
load_program_file
wait_for_timestamp_counter_long
32-bit "Timestamp Counter"
Chapter 8.12 "Time Measurements", page
Counter".
value.
value.
TimeStampCounterLong is:
and then keeps running until the next
are identical.
281.
436