Set_Softstart_Mode; Set_Softstart_Mode_List - Scanlab RTC6 PCIe Board Installation And Operation Manual

Ctrl Command set_softstart_mode
Function No function.
set_softstart_mode( Mode, Number, Delay )
Call
Mode
Parameters
Number
Delay
Comments • set_softstart_mode has no effect on the user program.
RTC4RTC6 Unchanged functionality.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
References –
Variable

set_softstart_mode_list

List Command
Function No function.
set_softstart_mode_list( Mode, Number, Delay )
Call
Mode
Parameters
Number
Delay
Comments • See set_softstart_mode.
RTC4RTC6 New command.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
References –
RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
As an unsigned 32-bit value.
As an unsigned 32-bit value.
As an unsigned 32-bit value.
Like set_softstart_mode.
Like set_softstart_mode.
Like set_softstart_mode.
743