Changed Timing Behavior - Scanlab RTC6 PCIe Board Installation And Operation Manual

Changed Timing Behavior

The following RTC4 list commands are processed by
the RTC6 PCIe Board as "short list commands". This
can result in a changed timing behavior during
user program execution, see
Variable and Multiple List Commands", page
• clear_io_cond_list
• list_call
• list_call_cond
• list_jump_cond (changed)
• list_return
• save_and_restart_timer
• set_extstartpos_list
• set_firstpulse_killer_list
• set_io_cond_list
• set_jump_speed
• set_laser_delays
• set_laser_timing (changed)
• set_list_jump
• set_mark_speed
• set_scanner_delays
• set_standby_list
set_trigger
• (enhanced)
set_wobbel
• (changed)
write_8bit_port_list
•
write_da_1_list
•
write_da_2_list
•
write_da_x_list
•
write_io_port_list
•
Likewise, automatic delay adjustments can produce a
changed timing behavior, see
Delay Adjustments", page
RTC6 boards
Doc. Rev. 1.0.21 en-US
2 Product Overview
Section "Normal, Short,
302.
Section "Automatic
155.
52