Quit_Loop - Scanlab RTC6 PCIe Board Installation And Operation Manual

Undelayed periodic_toggle_list
Short List
Command
RTC4RTC6 New command.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
Last change DLL 605, OUT 605: endless toggling with Count = 2
References periodic_toggle,
Ctrl Command quit_loop
Stops the repeating automatic list change started with start_loop.
Function

quit_loop()

Call
Comments • Before list execution is stopped, the current list is fully executed until the next
set_end_of_list
start_loop
•
RTC4RTC6 Unchanged functionality.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
start_loop
References
RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
set_port_default
is encountered.
must be called prior to quit_loop. Otherwise, quit_loop has no effect.
32
–1.
574