Scanlab RTC6 PCIe Board Installation And Operation Manual page 404

Ctrl Command get_galvo_controls
RTC4RTC6 New command.
In RTC4 Compatibility
by 16. The allowed value range decreases accordingly.
Even in
RTC5RTC6 Unchanged functionality.
In RTC5 Compatibility
16. The allowed value range decreases accordingly.
Even in
Version info Available as of DLL 600, OUT 600, RBF 600.
References select_cor_table
RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
Mode, the RTC6 multiplies the specified values for x, y, z and Defocus
RTC4 Compatibility Mode, all returned values are in the RTC6 20-bit range.
Mode, the RTC6 multiplies the specified values for z and Defocus by
RTC5 Compatibility Mode, all returned values are in the RTC6 20-bit range.
404