Execute_List; Execute_List_1; Execute_List_2 - Scanlab RTC6 PCIe Board Installation And Operation Manual

Ctrl Command execute_list
Function Starts execution at the beginning of the specified list ("List 1" or "List 2").
execute_list( ListNo )
Call
ListNo
Parameters
Comments • execute_list is synonymous with
•

execute_list_1

RTC4RTC6 Unchanged functionality.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
References get_status, execute_at_pointer,
Ctrl Command execute_list_1
Function See execute_list.
Call

execute_list_1()

RTC4RTC6 Unchanged functionality.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
execute_list
References
Ctrl Command execute_list_2
Function See execute_list.

execute_list_2()

Call
RTC4RTC6 Unchanged functionality.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
References execute_list
RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
Number of the list to be executed.
As an unsigned 32-bit value.
Allowed values: [uneven: "List 1", even: "List 2"].
execute_list_pos
and execute_list_2
execute_list_pos
with Pos = 0.
(with no parameters) can be used alternatively.
385