Get_List_Pointer - Scanlab RTC6 PCIe Board Installation And Operation Manual

Ctrl Command get_list_pointer
Function Returns the current relative position of the input pointer as well as the list number.
get_list_pointer( &ListNo, &Pos )
Call
ListNo
Returned
parameter
values
Pos
Comments • The absolute
input pointer can be queried by
• The number of list positions until the end of the respective list (from the input pointer)
can be queried by get_list_space.
• The board-specific error variables
Handling", page
• If the input pointer is invalid when get_list_pointer is called (for example, after a
list_return), the return values are ListNo = 0 and Pos = 0xFFFFFF.
RTC4RTC6 New command.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
References get_input_pointer,
RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
Number of the list in which the input pointer is currently located.
As a pointer to an unsigned 32-bit value. [1...3].
Current position of the input pointer (offset relative to the start of the
respective list). As a pointer to an unsigned 32-bit value.
RTC6 List Memory address (offset relative to the start of "List 1") of the
get_input_pointer
LastError
130, are neither generated nor altered by get_list_pointer.
get_list_space
(see also comments there).
and AccError, see Chapter 6.8 "Error
413