Set_Softstart_Level; Set_Softstart_Level_List - Scanlab RTC6 PCIe Board Installation And Operation Manual

Ctrl Command set_softstart_level
Function No function.
set_softstart_level( Index, Level )
Call
Index
Parameters
Level
Comments • set_softstart_level has no effect on the user program.
RTC4RTC6 Unchanged functionality.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
References

set_softstart_level_list

Normal List set_softstart_level_list
Command
Function No function.
set_softstart_level_list( Index, Level1, Level2, Level3 )
Call
Index
Parameters
Level1
Level2
Level3
Comments • See set_softstart_level.
RTC4RTC6 Unchanged functionality.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
References

set_softstart_level

RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
As an unsigned 32-bit value.
As an unsigned 32-bit value.
Like set_softstart_level.
Like set_softstart_level.
Like set_softstart_level.
Like set_softstart_level.
742