Scanlab RTC6 PCIe Board Installation And Operation Manual page 801

Ctrl Command store_timestamp_counter
Function Saves the current
store_timestamp_counter()
Call
Parameters None.
Comments • See
• The current
TimeStampStorage
for wait_for_timestamp_counter.
RTC4RTC6 New command.
RTC5RTC6 New command.
Version info Available as of DLL 617, OUT 617, RBF 623.
References store_timestamp_counter_list,
Undelayed store_timestamp_counter_list
Short List
Command
Function Like store_timestamp_counter, but a list command.
Call store_timestamp_counter_list()
Parameters None.
Comments • See store_timestamp_counter.
RTC4RTC6 New command.
RTC5RTC6 New command.
Version info Available as of DLL 617, OUT 617, RBF 623.
References store_timestamp_counter,
RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
32-bit "Timestamp Counter"
Chapter 8.12 "Time Measurements", page
32-bit "Timestamp Counter"
wait_for_timestamp_counter
wait_for_timestamp_counter
value.
281.
value is stored as time reference
801