Set_Multi_Mcbsp_In_List - Scanlab RTC6 PCIe Board Installation And Operation Manual

Ctrl Command set_multi_mcbsp_in
RTC4RTC6 New command.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
Last change DLL 617, OUT 617: compatibility with
Comments set_multi_mcbsp_in_list, read_multi_mcbsp, set_wobbel_control,
Normal List

set_multi_mcbsp_in_list

Command
Function Like set_multi_mcbsp_in, but a list command.
Restriction Like set_multi_mcbsp_in.
set_multi_mcbsp_in_list( Ctrl, P, Mode )
Call
Ctrl
Parameters
P
Mode
Comments • See set_multi_mcbsp_in.
RTC4RTC6 New command.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
Last change DLL 617, OUT 617: compatibility with
References set_multi_mcbsp_in, read_multi_mcbsp, set_wobbel_control,
RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
Like set_multi_mcbsp_in.
Like set_multi_mcbsp_in.
Like set_multi_mcbsp_in.
"Fly Extension" Commands.
set_wobbel_vector
"Fly Extension" Commands.
set_wobbel_vector
704