Set_Control_Mode; Set_Control_Mode_List - Scanlab RTC6 PCIe Board Installation And Operation Manual

Normal List

set_control_mode_list

Command
Function Like set_control_mode, but a list command.
set_control_mode_list( Mode )
Call
Mode
Parameters
Comments • The counter for
RTC4RTC6 Unchanged functionality for the bits that are also used on the RTC4.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
Last change DLL 605, OUT 605:
References

set_control_mode

RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
Like set_control_mode.
External Starts is not reset by set_control_mode_list.
Bit #4.
622