Set_Sky_Writing - Scanlab RTC6 PCIe Board Installation And Operation Manual

Ctrl Command set_sky_writing
Function Activates
Sky Writing.
set_sky_writing( Timelag, LaserOnShift )
Call
Timelag
Parameters
LaserOnShift
Comments • set_sky_writing is identical to
set_sky_writing_para( Timelag, LaserOnShift, Nprev,
with
• See also information about
page
RTC4RTC6 New command.
RTC5RTC6 Unchanged functionality.
In RTC5 Compatibility
32. The allowed value range decreases accordingly.
Version info Available as of DLL 600, OUT 600, RBF 600.
References set_sky_writing_para,
RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
Sky Writing Mode 1 and sets the corresponding parameters or switches off
Like set_sky_writing_para.
Like set_sky_writing_para.
Nprev = approx. (0.15 × Timelag) and
set_sky_writing_para
160.
Mode, the RTC6 multiplies the value specified for LaserOnShift by
set_sky_writing_list
Npost )
Npost = approx. (0.1 × Timelag).
and Chapter 7.2.4 "Sky Writing",
734