Version Information; Optional Functions - Scanlab RTC6 PCIe Board Installation And Operation Manual

10.1.3 Version Information

Descriptions for a number of commands include
version information, listed under "Version info":
• For newly added commands: the software version
in which they become available
• For some older commands: information on
implemented changes.
New commands as well as all changes to existing
commands are described in
RTC6_Software_RevisionHistory_<Date>_<Rev>.pdf.
RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands

10.1.4 Optional Functions

If an option is not present on the RTC6 PCIe Board,
see Chapter 2.6 "Options", page
associated commands have only partial or non-
existent effect:
• Without Option Processing-on-the-fly,
commands to activate a Processing-on-the-fly
correction have no effect
• Without Option "3D",
3D vector commands are executed, however, no
z axis signals are outputted
• Without Option "Second Scan Head
commands for which the scan head connector
can be explicitly specified have not effect on the
second scan head connector (for example,
set_matrix)
If applicable, the command descriptions contain
corresponding notes.
38, then the
Control",
305