Scanlab RTC6 PCIe Board Installation And Operation Manual page 1000

Changes to Document Revision
Where
Global
Chapter 1 "About this Manual", page 24
Section "Folder RTC6 Tools", page 34
Chapter 7.3.4 "3D Image
load_z_table_20b, page 519
load_z_table_no_20b, page 521
set_mcbsp_out_ptr, page 697
set_mcbsp_out_ptr_list, page 698
set_wobbel_vector, page 776
set_wobbel_vector, page 776
Chapter 16.7.1 "Upgrading BIOS-ETH",
page 909
Chapter 19 "Appendix D: RTC6 Software
Packages – History", page 939
(a) See also RTC6_Software_RevisionHistory_<Date>_<Rev>.pdf.
RTC6 boards
Doc. Rev. 1.0.21 en-US
21 Appendix F: Change Index
1.0.19 en-US from Document Revision
What
Document Revision
• 1.0.19 en-US
applies to RTC6 Software Package
• V1.13.0
Editorial change.
Software change.
Field", page 171 Editorial enhancement.
of correction file are to be interpreted as 16-bit values.
Editorial change. Allowed value range for A, B, C.
Editorial change. Allowed value range for A, B, C.
Software change.
Software change.
Software change.
current laser power P after set_wobbel_mode(
formula,
(instead of: P = P0 × (1 + dPower × n).
Software change.
current laser power P after set_wobbel_mode(
formula,
(instead of: P = P100 × (factor + dPower × n)).
Software change.
Software change.
Appendix F: Change Index, page 984
1.0.18 en-US
(a)
(a)
BIOS-ETH 33.
ABC values from the *_ReadMe.txt file
(a)
Number
Bit 31.
(a)
New command.
(a)
Calculation for the variation of the
page 777
(a)
Calculation for the variation of the
page 778
(a)
BIOS-ETH 33.
(a)
V1.13.0.
Mode
= 2 ):
Mode
= 3 ):
1000