Glossary And Abbreviations - Scanlab RTC6 PCIe Board Installation And Operation Manual

1.3 Glossary and Abbreviations

[*]mark[*] Command
[*]para[*] Command
3D Image Field
"Arc" Command
Answer Telegram
BCD
BIOS
BUSY Pin
Command Telegram
Data Streaming
DSP
Dynamic Focusing Unit
Ethernet Link Loss
RTC6 boards
Doc. Rev. 1.0.21 en-US
1 About this Manual
All commands with "mark" as part of their names.
See Section "Mark Commands", page
All commands with "para" as part of their names.
See Section "[*]Para[*] Commands", page
Synonym: working volume (process volume).
See Chapter 7.3.4 "3D Image Field", page
Umbrella term for Arc Commands
In context with Remote Interface
telegram from RTC6 Ethernet Board, see telegrams.h.
Consists of header and payload.
Binary Coded Decimal.
Basic Input/Output System. Is permanently stored in the
of the RTC6 board. See also RTC6conf.exe.
Memory
Pin with BUSY OUT signal (=
• RTC6 PCIe Board:
– LASER Connector, page 73
– EXTENSION 1 Socket Connector, page 78
• RTC6 Ethernet Board:
– LASER Socket Connector, page 882
– EXTENSION 1 Socket Connector, page 890
In context with Remote Interface
telegram to RTC6 Ethernet Board, see telegrams.h.
Consists of header and payload.
See RtcStreamParser-DLL – Application Programming Interface
Manual, Brief information Data Streaming.
Digital signal processor on the RTC6 board.
This includes, for example, the following SCANLAB products:
varioSCAN, varioSCAN , varioSCAN FC and varioSCAN FLEX,
de
excelliSHIFT.
The cable connection to the RTC6 Ethernet Board has been
disconnected.
137.
139.
170.
and Ellipse Commands.
Mode:
BUSY list execution status).
Mode:
Flash
26