Scanlab RTC6 PCIe Board Installation And Operation Manual page 985

Changes to Document Revision
Where
Global
(a) See also RTC6_Software_RevisionHistory_<Date>_<Rev>.pdf.
Changes to Document Revision
Where
Global
eth_get_com_timeouts, page 364
eth_set_com_timeouts, page 377
load_disk, page 498
range_checking, page 575
save_disk, page 600
set_wobbel_vector, page 776
sync_slaves, page 807
(a) See also RTC6_Software_RevisionHistory_<Date>_<Rev>.pdf.
RTC6 boards
Doc. Rev. 1.0.21 en-US
21 Appendix F: Change Index
1.0.0 en-US from Document Revision 0.0
What
Initial Document-Revision.
Document Revision
• 1.0.0 en-US
applies to RTC6 Software Package
(a)
• V1.5.0
Appendix F: Change Index, page 984
1.0.1 en-US from Document Revision
What
Document Revision
• 1.0.1 en-US
applies to RTC6 Software Package
(a)
• V1.5.2
Software change.
even without access to an RTC6 Ethernet Board.
Same as eth_get_com_timeouts.
Software change.
Software change.
passed on to all slave boards.
Same as load_disk.
Editorial enhancement. To activate "Freely definable wobbel
shape" by set_wobbel_control
set_wobbel_mode(
Software change.
Appendix F: Change Index, page 984
1.0.0 en-US
(a)
RTC6 DLL-only settings are now possible
(a)
Has now a version control.
(a)
Mode = 2 added: a simulate_ext_stop
and
Mode
= 3 ), see page 778.
(a)
Has no function anymore.
is
985