Para_Mark_Abs_3D - Scanlab RTC6 PCIe Board Installation And Operation Manual

Normal List

para_mark_abs_3d

Command
Function Moves the laser focus at mark speed along a 3D vector from the current position to the
specified position (absolute coordinate values) within the
varies the signal parameter selected by
Restriction If the Option "3D"
select_cor_table), then para_mark_abs_3d has the same effect as para_mark_abs.
However, split-up into
the effective mark speed in the xy plane.
para_mark_abs_3d( X, Y, Z, P )
Call
X
Parameters
Y
Z
P
Comments • Except for the additional motion in the third dimension, this command functions
similarly to the
• Further comments see mark_abs_3d.
• [*]para_mark[*] commands generally do not take
RTC4RTC6 New command.
In RTC4 Compatibility
y coordinates by 16. The allowed value range decreases accordingly.
For the parameter P, see para_jump_abs.
RTC5RTC6 Unchanged functionality.
For the parameter P, see para_jump_abs.
Version info Available as of DLL 600, OUT 600, RBF 600.
mark_abs_3d, set_vector_control, para_mark_abs,
References
RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
is not enabled or no 3D correction table has been assigned (see
Microsteps is calculated like a 3D command and hence influences
Absolute x coordinate of the mark vector end point. In bits.
As a signed 32-bit value.
Allowed value range: [–268,435,456...+268,435,455].
Out-of-range values are clipped to the boundary values.
The complete value range is only usable as a virtual
for (enabled) Processing-on-the-fly applications.
Like X (analogously).
Like X (analogously), except
Allowed value range: [–524,288...+524,287].
End value of the signal parameter. As an unsigned 32-bit value. Allowed
values: dependent on the selection made by
parameter), identical with
para_mark_abs command (see comments there).
Mode, the RTC6 multiplies the specified value for the x and
3D Image
set_vector_control linearly to the specified value.
Image Field
set_vector_control (Ctrl
set_vector_control (Value
Sky Writing
para_mark_rel_3d
Field. Simultaneously
for example,
parameter).
into account.
560