Load_Jump_Table - Scanlab RTC6 PCIe Board Installation And Operation Manual

Ctrl Command load_fly_2d_table
• load_fly_2d_table is not executed
Comments
(cont'd)
– the
– the
• load_fly_2d_table is even executed, if:
– a list has been paused by
• During the runtime of load_fly_2d_table,
• Before loading a table, load_fly_2d_table performs a
produces error code 4 in case of error.
RTC4RTC6 New command.
RTC5RTC6 Unchanged functionality.
Additional: 2 tables can now be loaded simultaneously.
Version info Available as of DLL 600, OUT 600, RBF 600.
References set_fly_2d, init_fly_2d,
Ctrl Command load_jump_table
Function Loads a value table with
performs automatic determination on the attached scan system) and uses linear
interpolation to create the internal
Jump Mode.
Call NoOfDataPoints = load_jump_table( Name, No, PosAck, MinDelay, MaxDelay, ListPos )
Parameters Name
No
PosAck
MinDelay
MaxDelay
ListPos
See load_jump_table_offset.
Result
• load_jump_table is identical to
Comments
RTC4RTC6 New command.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
load_jump_table_offset
Reference
RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
BUSY list execution status
INTERNAL-BUSY list execution status
set_wait (PAUSED list execution status
get_fly_2d_offset
Jump Delay
See load_jump_table_offset.
See load_jump_table_offset.
See load_jump_table_offset.
See load_jump_table_offset.
See load_jump_table_offset.
See load_jump_table_offset.
return code RTC6_BUSY), if:
(get_last_error
is set
is set
External Starts are suppressed.
DSP
data points from an ASCII text file (or alternatively
Jump Delay table for 2D jumps executable in
load_jump_table_offset
set)
memory check that
Offset
with = 0.
502