Get_Rtc_Mode - Scanlab RTC6 PCIe Board Installation And Operation Manual

Ctrl Command get_rtc_mode
Function Returns the currently set operation mode of the
DLLMode = get_rtc_mode()
Call
Result DLL operation mode as a 32-bit value.
= 4:
= 5:
= 6:
Comments • The
set_rtc6_mode. The default setting is
• get_rtc_mode is available even without explicit access rights to a particular RTC6
board.
• get_rtc_mode is not available as a multi-board command.
• The board-specific error variables
Handling", page
RTC4RTC6 New command.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
References set_rtc4_mode, set_rtc5_mode,
RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
RTC4 Compatibility Mode.
RTC5 Compatibility Mode.
RTC6 Standard Mode (default setting).
RTC6 DLL operation mode can be set by set_rtc4_mode,
130, are neither generated nor altered by get_rtc_mode.
RTC6 DLL.
RTC6 Standard Mode.
LastError and AccError, see
set_rtc6_mode
set_rtc5_mode or
Chapter 6.8 "Error
420