Scanlab RTC6 PCIe Board Installation And Operation Manual page 29

PosAck Signal
Processing-on-the-fly Session
RCM
Remote Command
Remote Control Command
Remote List Command
Reset of the RTC6 board
RtcStreamParser-DLL
SCANahead System
Software Reset
RTC6 boards
Doc. Rev. 1.0.21 en-US
1 About this Manual
• As of scan system firmware  2001.
• PosAck Signal-capable SCANLAB scan systems,
for example, intelliSCAN
• Refers to the meaning of:
– Bit #12, Bit #4, Bit #11, Bit #3 of the XY2-100 status word
transferred with 16-bit protocol
– Bit #16, Bit #8, Bit #15, Bit #7 of the XY2-100 status word
transferred with 20-bit protocol
• These bits are set, if the position errors of x axis and y axis are in
the allowed range:
– See also "excelliSCAN Scan Heads – Functional Principle of
SCANahead Servo Control and Operation by RTC6 Boards"
Manual, Chapter 3.1.3 "Returned Data Signal Differences:
Status Signal Behavior after Limit Value Exceedance", page
– For more information, refer to the corresponding scan head
manuals.
• Compare to TrAck Signal.
A section of a list that uses external inputs (encoder pulses,
transmissions) to correct moving workpiece positions.
Return Channel Multiplexing
Umbrella term for Remote Control
Remote List Commands. See
"Remote Interface Mode", page
telegrams.h
> enum REMOTE_ID > enumeration constants R_DC_*
 255.
See Chapter 16.9 "Remote Interface Mode", page
telegrams.h
> enum REMOTE_ID > enumeration constants R_LC_*
 256.
See Chapter 16.9 "Remote Interface Mode", page
Synonym: Software Reset.
See RtcStreamParser-DLL – Application Programming Interface
Manual.
SCANLAB scan system with SCANahead servo control, for example,
scan heads of the excelliSCAN series.
For further information see
Principle of SCANahead Servo Control and Operation by RTC6
Boards" Manual.
Restart after load_program_file. This does not reset everything, for
example, loaded correction tables are retained. Synonym:
the RTC6 board.
Commands and
Chapter 16.9
917.
917.
917.
"excelliSCAN Scan Heads – Functional
14.
McBSP
Reset of
29