Scanlab RTC6 PCIe Board Installation And Operation Manual page 559

Normal List para_mark_abs
Command
RTC4RTC6 New command.
In RTC4 Compatibility
The allowed value range decreases accordingly. For the parameter P, see para_jump_abs.
RTC5RTC6 Unchanged functionality.
For the parameter P, see para_jump_abs.
Version info Available as of DLL 600, OUT 600, RBF 600.
Last change OUT 619: handling of mark vector lengths = 0.
mark_abs, set_vector_control, para_mark_abs_3d,
References
RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
Mode, the RTC6 multiplies the specified values for X and Y by 16.
para_mark_rel
559