Set_Sky_Writing_Mode_List - Scanlab RTC6 PCIe Board Installation And Operation Manual

Normal List

set_sky_writing_mode_list

Command
Function Like set_sky_writing_mode, but a list command.
set_sky_writing_mode_list( Mode )
Call
Mode
Parameters
Comments • By set_sky_writing_mode_list,
activated or deactivated even within a list (switching to or from Mode = 2 or 3).
Here, an already-begun
next is started with it.
• Deactivation of
Mode = 1 to 0) results in the addition of a
Sky Writing
RTC4RTC6 New command.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
References set_sky_writing_mode
RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
Like set_sky_writing_mode.
Sky Writing Mode 2
Mark Command
Sky Writing Mode 1 by set_sky_writing_mode_list (switching from
– provided that no other delay is in effect (for example, a
and Sky Writing Mode 3
is finished with Sky Writing Mode 1
Mark Delay defined prior to activation of
can be
and the
Jump Delay).
738