Supplementary Software - Scanlab RTC6 PCIe Board Installation And Operation Manual

2.9 Supplementary Software

To facilitate customizing RTC correction files basing
on data of your own test measurements, SCANLAB
offers the correXion pro software with
accompanying manual, see also Section "Image Field
Correction Algorithm", page 174.
By using the SCANLAB laserDESK software, own laser
marking and material-processing programs
("laser jobs") can be created and executed without
software development. Many of the RTC6 functions
(1)
are supported.
For further information on laserDESK, refer to the
SCANLAB homepage.
(1) See also Notice!, page 73.
47
RTC6 boards
Doc. Rev. 1.0.21 en-US
2 Product Overview