ST−26
Ohmmeter
1
No continuity
Ohmmeter
1
Continuity
STARTING (1GR−FE)
Ohmmeter
2
Continuity
5
3
A00968
2
5
Battery
3
A00969
−
STARTER RELAY
STARTER RELAY
INSPECTION
1.
REMOVE STARTER RELAY
Remove the relay box cover and starter relay.
2.
INSPECT STARTER RELAY CONTINUITY
(a)
Using an ohmmeter, check that there is continuity be-
tween terminals 1 and 2.
If there is no continuity, replace the relay.
(b)
Check that there is no continuity between terminals 3 and
5.
If there is continuity, replace the relay.
3.
INSPECT STARTER RELAY OPERATION
(a)
Apply battery positive voltage across terminals 1 and 2.
(b)
Using an ohmmeter, check that there is continuity be-
tween terminals 3 and 5.
If there is no continuity, replace the relay.
4.
REINSTALL STARTER RELAY
ST0Q0−01