Drive: Fault On Non-Active Encoder; Cu: Data Memory, Memory Overflow; Tolerance Window Of Time Synchronization Exited; Cu: Memory Card Withdrawn - Siemens Sinamics S120 Diagnostic Manual

SINAMICS alarms
201065 <location>Drive: Fault on non-active encoder
Message value: -
Drive object: SERVO_COMBI, SERVO_SINUMERIK828
Reaction: NONE
Acknowledge: NONE
Cause: One or several non-active encoders indicate an error.
Remedy: Remove the error for the non-active encoder.
201068 <location>CU: Data memory, memory overflow
Message value: %1
Drive object: All objects
Reaction: OFF2
Acknowledge: IMMEDIATELY
Cause: A data memory area has been overloaded.
Fault value (r0949, interpret binary):
Bit 0 = 1: High-speed data memory 1 overloaded
Bit 1 = 1: High-speed data memory 2 overloaded
Bit 2 = 1: High-speed data memory 3 overloaded
Bit 3 = 1: High-speed data memory 4 overloaded
Remedy: - de-activate the function module.
- de-activate the drive object.
- remove the drive object from the target topology.
201099 <location>Tolerance window of time synchronization exited
Message value: -
Drive object: All objects
Reaction: NONE
Acknowledge: NONE
Cause: The time master exited the selected tolerance window for time synchronization.
See also: p3109 (RTC real time synchronization, tolerance window)
Remedy: Select the re-synchronization interval so that the synchronization deviation between the time master and drive system
lies within the tolerance window.
See also: r3108 (RTC last synchronization deviation)
201100 <location>CU: Memory card withdrawn
Message value: -
Drive object: AFE_SINUMERIK_828, BIC_SINUMERIK_828, SERVO_COMBI, SERVO_SINUMERIK828, SIC_COMBI,
SIC_SINUMERIK_828
Reaction: NONE
Acknowledge: NONE
Cause: The memory card (non-volatile memory) was withdrawn during operation.
Notice:
It is not permissible for the memory card to be withdrawn or inserted under voltage.
Remedy: - power down the drive system.
- re-insert the memory card that was withdrawn - this card must match the drive system.
- power up the drive system again.
522
Diagnostics Manual, 07/2010, 6FC5398-8BP40-0BA0
Alarms