Tm: Temperature Alarm Threshold Channel 1/2/3 Exceeded - Siemens Sinamics S120 Diagnostic Manual

SINAMICS alarms
235211 <location>TM: Temperature alarm threshold channel 1 exceeded
Message value: %1
Drive object: AFE_SINUMERIK_828, BIC_SINUMERIK_828, SERVO_COMBI, SERVO_SINUMERIK828, SIC_COMBI,
SIC_SINUMERIK_828, TM120
Reaction: NONE
Acknowledge: NONE
Cause: The temperature measured using the temperature sensing of the Terminal Module (TM) (r4105[0]) has exceeded the
threshold value to initiate this alarm (p4102[0]).
For PTC, the following applies:
- if r4101[0] > 1650 ohms, the temperature r4105[0] = 250 °C
- if r4101[0] <= 1650 ohms, the temperature r4105[0] = -50°C
Alarm value (r2124, interpret decimal):
Temperature value multiplied by 10 at the point of initiation.
Remedy: See also: p4102 (TM120 temperature evaluation fault/alarm threshold)
235212 <location>TM: Temperature alarm threshold channel 2 exceeded
Message value: %1
Drive object: AFE_SINUMERIK_828, BIC_SINUMERIK_828, SERVO_COMBI, SERVO_SINUMERIK828, SIC_COMBI,
SIC_SINUMERIK_828, TM120
Reaction: NONE
Acknowledge: NONE
Cause: The temperature measured using the temperature sensing of the Terminal Module 120 (TM120) (r4105[1]) has
exceeded the threshold value to initiate this alarm (p4102[2]).
For PTC, the following applies:
- if r4101[1] > 1650 ohms, the temperature r4105[1] = 250 °C
- if r4101[1] <= 1650 ohms, the temperature r4105[1] = -50°C
Alarm value (r2124, interpret decimal):
Temperature value multiplied by 10 at the point of initiation.
Remedy: See also: p4102 (TM120 temperature evaluation fault/alarm threshold)
235213 <location>TM: Temperature alarm threshold channel 3 exceeded
Message value: %1
Drive object: AFE_SINUMERIK_828, BIC_SINUMERIK_828, SERVO_COMBI, SERVO_SINUMERIK828, SIC_COMBI,
SIC_SINUMERIK_828, TM120
Reaction: NONE
Acknowledge: NONE
Cause: The temperature measured using the temperature sensing of the Terminal Module 120 (TM120) (r4105[2]) has
exceeded the threshold value to initiate this alarm (p4102[4]).
For PTC, the following applies:
- if r4101[2] > 1650 ohms, the temperature r4105[2] = 250 °C
- if r4101[2] <= 1650 ohms, the temperature r4105[2] = -50°C
Alarm value (r2124, interpret decimal):
Temperature value multiplied by 10 at the point of initiation.
Remedy: See also: p4102 (TM120 temperature evaluation fault/alarm threshold)
858
Diagnostics Manual, 07/2010, 6FC5398-8BP40-0BA0
Alarms