List Of Actions - Siemens Sinamics S120 Diagnostic Manual

List of actions

Product: Handbuch_Sinumerik, Version: V12.0, Language: eng,
Objects:
/NON/ No. 0
/SYSTEM_SHUTDOWN/ No. 96
Definitions: Switch off system
(VDI signal)
Should not occur in any alarm
/SERUPRO_ON/ No. 97
Definitions: Connect block search PI in mode 5.
Block search is simulated in this mode
by executing the program under "program test mode"
as far as the search target block.
/ESR/ No. 98
Definitions: Extended Stop and Retract
/BLOCKSEARCHRUN_SIGNAL/ No. 99
Definitions: Block search (general) is being activated.
Should not occur in any alarm as, if necessary, the PI service is acknowledged negatively.
/BLOCKSEARCHRUN_INTEGR/ No. 100
Definitions: Integrated block search, this means that a search run is restarted after a stopped program.
Alarms
Diagnostics Manual 07/2010, 6FC5398-8BP40-0BA0
7
909