Block %2: Upgrade Nck Software Version; Block %2: %]No Tool Available With This Name %4; Block %2: Several Tools Are Active; Block %2: D Number Of Tool Offset, Too Many Digits - Siemens Sinamics S120 Diagnostic Manual

61342 [Channel %1: ] Block %2: Upgrade NCK software version
Parameters: %1 = Channel number
%2 = Block number, label channel number
Definitions: Alarm can be triggered by following measuring cycles: all measuring cycles.
Remedy: Up to measuring cycle software 6.2: _SI[1] in GUD6 has no value or a value < 3
As from measuring cycle software 6.3: Upgrade NCK software version.
61343 %[[Channel %1: ] Block %2: %]No tool available with this name %4
Parameters: %1 = Channel number
%2 = Block number, label channel number
Definitions: The alarm can be triggered by the following measuring cycles: all measuring cycles, CYCLE63, CYCLE64
Remedy: Check tool name.
61344 [Channel %1: ] Block %2: Several tools are active
Parameters: %1 = Channel number
%2 = Block number, label channel number
Definitions: Alarm can be triggered by following measuring cycles: all measuring cycles.
Remedy: Remove tool from another spindle.
61345 [Channel %1: ] Block %2: D number of tool offset, too many digits
Parameters: %1 = Channel number
%2 = Block number, label channel number
Definitions: Alarm can be triggered by following measuring cycles: all measuring cycles.
Remedy: Reduce the D number in _KNUM, check software or MD of flat D number.
61346 [Channel %1: ] Block %2: Distance between starting point and measuring point <=0
Parameters: %1 = Channel number
%2 = Block number, label channel number
Definitions: The alarm is triggerd by the following cycles: CYCLE961.
Reaction: Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
Remedy: 840D:
- Parameter _SETV[0] or _SETV[1] is empty or less than 0.
840D sl:
- Parameter X1 or Y1 is empty or less than 0.
Program Clear alarm with the RESET key. Restart part program
Continuation:
Alarms
Diagnostics Manual, 07/2010, 6FC5398-8BP40-0BA0
NCK alarms
439