Non-Ferrous Window; Bucket Elevator - Siemens milltronics MFA 4P Instruction Manual

Non-Ferrous Window

6 mm ø (0.25")
CLEARANCE
4 HOLES
64 mm ø (3.5")
CLEARANCE
HOLE
For screw conveyor with trough over 3.1 mm (0.125") thick or for high temperature
applications. The dimensions shown for the base, window, and bracket are the minimum
recommended with tolerances of ± 0.8 mm (0.031"). Use 305, 310, or 316 stainless steel,
brass, or aluminum.
The probe may not touch the window if temperatures are in excess of 60 °C (140 °F) when
using the low temperature probes or 260 °C (500 °F) when using the high temperature
probes.

Bucket Elevator

7ML19985FM01
CONVEYOR
HOUSING
115 mm
(4.52")
153 mm SQ.
C
115 mm
C
(4.52")
140 mm SQ.
(5.5")
179 mm SQ.
(7")
MINIMUM RECOMMENDED DIMENSIONS SHOWN
MFA 4p – INSTRUCTION MANUAL
12.7 mm MAX.
(0.5")
WINDOW
(6")
70 mm
(2.75")
WELD
BASE PLATE
PROBE AND
MOUNTING FLANGE
BRACKET
Page 25