Block %2: Dimension Too Small; Block %2: Maximum Number Of Characters Per Line Exceeded; Block %2: Variable Column Width Not Possible; Block %2: Insufficient Column Width - Siemens Sinamics S120 Diagnostic Manual
Hide thumbs
Also See for Sinamics S120:
- Function manual (1094 pages) ,
- Manual (848 pages) ,
- Equipment manual (570 pages)
Table of Contents
Advertisement
NCK alarms
62305
[Channel %1: ] Block %2: Dimension too small
Parameters:
%1 = Channel number
%2 = Block number, label channel number
Definitions:
The alarm is triggerd by the following cycles: CYCLE974, CYCLE977, CYCLE978, CYCLE979, CYCLE994
Remedy:
The difference between actual and setpoint value is smaller than lower tolerance limit (parameter _TLL).
62306
[Channel %1: ] Block %2: Permissible measuring difference exceeded
Parameters:
%1 = Channel number
%2 = Block number, label channel number
Definitions:
The alarm is triggerd by the following cycles: CYCLE971, CYCLE972, CYCLE974, CYCLE977, CYCLE978,
CYCLE979, CYCLE982, CYCLE994
Remedy:
The difference between actual and setpoint value is larger than tolerance parameter _TDIF, tool data are not cor-
rected.
62307
[Channel %1: ] Block %2: Maximum number of characters per line exceeded.
Parameters:
%1 = Channel number
%2 = Block number, label channel number
Definitions:
The alarm is triggerd by the following cycles: CYCLE105
Insufficient number of characters per line.
Remedy:
Increase the value in _PROTFORM[1]
62308
[Channel %1: ] Block %2: Variable column width not possible
Parameters:
%1 = Channel number
%2 = Block number, label channel number
Definitions:
The alarm is triggerd by the following cycles: CYCLE105.
Unable to generate variable column widths, as no header available.
A fixed column width of 12 characters is used.
Reaction:
Alarm display.
Remedy:
Complete the header in _PROTVAL[0].
Program
Clear alarm with the Delete key or NC START.
Continuation:
62309
[Channel %1: ] Block %2: Insufficient column width
Parameters:
%1 = Channel number
%2 = Block number, label channel number
Definitions:
The alarm is triggerd by the following cycles: CYCLE105.
The value to be logged is larger than the column width.
Reaction:
Alarm display.
Remedy:
Adjust _PROTFORM[5] or change the header at variable column width.
Program
Clear alarm with the Delete key or NC START.
Continuation:
496
Diagnostics Manual, 07/2010, 6FC5398-8BP40-0BA0
Alarms
Hide quick links:
Advertisement
Table of Contents
