Siemens Sinamics S120 Diagnostic Manual page 911

/SINGLEAX_RESET_MASTER/ No. 106
Definitions: Canceling a single axis motion
(VDI signal)
Not permitted if:
The axis is not controlled by the PLC
Initially, not for all types of axis
/SINGLEAX_DELDIS_MASTER/ No. 107
Definitions: Delete distance-to-go of a single axis motion
(VDI signal)
Not permitted if:
The axis is not controlled by the PLC
Initially, not for all types of axis
/SINGLEAX_PLCCTRL_ON_MASTER/ No. 108
Definitions: Activate: The axis is now controlled by the PLC
(VDI signal)
Not permitted if:
The axis is not controlled by the PLC
Initially, not for all types of axis
/SINGLEAX_PLCCTRL_OFF_MASTER/ No. 109
Definitions: Deactivate: The axis is now controlled by the PLC
(VDI signal)
Not permitted if:
The axis is a main run axis or neutral.
Initially, not for all types of axis
/SINGLEAX_JOG_WHEEL/ No. 110
Definitions: Available soon
/SINGLEAX_JOG_PLUS_MASTER/ No. 111
Definitions: Available soon
/SINGLEAX_JOG_MINUS_MASTER/ No. 112
Definitions: Available soon
Alarms
Diagnostics Manual, 07/2010, 6FC5398-8BP40-0BA0
List of actions
911