Block %2: Path For Logfile Not Permitted; Block %2: Path For Logfile Not Found; Block %2: File For Logfile Is Being Used; Block %2: No Resources Free - Siemens Sinamics S120 Diagnostic Manual

61352 [Channel %1: ] Block %2: Path for logfile not permitted
Parameters: %1 = Channel number
%2 = Block number, label channel number
Definitions: The alarm is triggerd by the following cycles: CYCLE106.
The specified path for the log file is incorrect.
Remedy: Check parameter _PROTNAME[1]
61353 [Channel %1: ] Block %2: Path for logfile not found
Parameters: %1 = Channel number
%2 = Block number, label channel number
Definitions: The alarm is triggerd by the following cycles: CYCLE106.
The specified directory does not exist or the specified path is incorrect.
Remedy: Check parameter _PROTNAME[1]
61354 [Channel %1: ] Block %2: File for logfile not found
Parameters: %1 = Channel number
%2 = Block number, label channel number
Definitions: The alarm is triggerd by the following cycles: CYCLE106.
No name specified for the log file.
Remedy: Check parameter _PROTNAME[1]
61355 [Channel %1: ] Block %2: Incorrect file type for logfile
Parameters: %1 = Channel number
%2 = Block number, label channel number
Definitions: The alarm is triggerd by the following cycles: CYCLE106.
The file extension for the log file is incorrect.
Remedy: Check parameter _PROTNAME[1]
61356 [Channel %1: ] Block %2: File for logfile is being used
Parameters: %1 = Channel number
%2 = Block number, label channel number
Definitions: The alarm is triggerd by the following cycles: CYCLE106.
The log file is already used by an NC program.
Remedy: Check parameter _PROTNAME[1]
61357 %[[Channel %1: ] Block %2: %]No resources free
Parameters: %1 = Channel number
%2 = Block number, label channel number
Definitions: Alarm is triggerd by the following cycles: CYCLE63, CYCLE64, CYCLE106
Not enough NC memory space available or too many files / directories in the NC file system.
Alarms
Diagnostics Manual, 07/2010, 6FC5398-8BP40-0BA0
NCK alarms
441